FlowGuard 6280 v2 Standard Pressure transmitter.
The FlowGuard 6280 v2 is an updated version of 6280 with a faster, and better processor with higher resolution. The advanced processor transmitter is aimed for the standard pressure measurement tasks. It’s designed with the user and installer in mind. The 6280 v2 eliminate many of the problems that traditional sensors suffer from and provide as much flexibility as possible.
The unit has field selectable features like 2 separate independent scalable signal outputs. A Volt (0-1, 0-5, 0-10, 1-10, 2-10V) and a Current (0-20, 4-20mA). That the customer can select the output ranges on in steps of 1Pa or 0.001 inch/H2O. And to simplify the installation, the 6280 v2 uses display and push buttons to make all the settings easy.
With these options in one sensor you can cover e.g. static duct pressure measuring (unidirect [U] sensor), or most situations for room pressure measurements. And if the 6280 v2 is ordered with Bidirectional sensor [B] it’s possible to measure both positive and negative pressures. The analogue output will be at middle point of selected output range when pressure is at zero for the bidirect model.
The sensor has a silicone membrane and works with capacitive technique. It’s extremely accurate and durable. To further improve it, auto calibration is an option for applications where any small drift over time is not accepted, as in hard to reach locations, or when the sensor is configured for very low pressures like ± 5 Pa.
The FlowGuard 6280 v2 also have 2 Alarms for Low and High pressures, and it can be ordered with a Alarm Relay.
And the pressure reading, alarms etc can be reached by BMS through the Modbus if wanted. The Modbus feature adds more value to the product since all settings and parameters can be reached from a CPS/BMS/Scada.
6280 v2 Features:
| • LED-Display for setup • Field selectable output • Optional Auto calibration • Easy to install and configure |
• Selectable Range • Modbus RTU RS485 • Optional visible display • Optional Alarm Relay |
• CPS Ready • High & Low Alarms • Accurate, Stability & High Resolution • 2 separate analouge outputs: Both V and mA |
