FlowGuard 6283v2 Advanced Pressure transmitter.
The FlowGuard 6283 v2 is an updated version with a faster and better processor with higher resolution. It’s aimed for the advanced pressure, flow & airchanges measurement tasks. It’s designed with the user and installer in mind. The 6283 v2 provide as much flexibility as possible in one transmitter.
The unit has 2 separate independent scalable signal outputs (a Volt and a Current). The output ranges can be scaled in steps of 1Pa or 0.001 inch/H2O. The 6283v2 have Positive and Negative Mode, and 2 alarms for each mode. Alarm delay and Door open delay etc. The 6283v2 can calculate and display flow or airchanges directly in the display, with high & low alarm levels. Alarm Relay is an option for a i.e. light tower or signal to BMS. And to simplify the installation, the 6283 v2 uses display and push buttons to make all the settings easy.
With all these options in one sensor you can cover e.g. static duct pressure measuring (unidirect [U] sensor), duct flow or airchanges (with flowstation) and most situations for room pressure measurements. And if the 6283 v2 is ordered with Bidirectional sensor [B] it’s possible to measure both positive and negative pressures full scale. The analogue output will be at middle point of selected output range when pressure is at zero for the bidirect model.
The sensor has a silicone membrane and works with capacitive technique. It’s extremely accurate and durable. To further improve it, auto calibration is an option for applications where any small drift over time is not accepted, as in hard to reach locations, or when the sensor is configured for very low pressures like ± 5 Pa.
The Modbus feature adds more value to the product since all settings and parameters (pressure reading, alarms, room mode selections etc) can be reached by a CPS / BMS /Scada system.
6283 v2 Features:
| • LED-Display for setup • Field selectable output • Optional Auto calibration • Easy to install and configure • Selectable Range • Modbus RTU RS485 |
• Optional visible display • Optional Alarm Relay • CPS Ready • Alarm & Door Switch delays • Dual Room modes |
• 2 set of High & Low Alarms • No Isolation & Service mode • Calculates Flow & AirChanges • Accurate, Stability & High Resolution • 2 separate analouge outputs: Both V and mA |
