System 6041 is a unique system in it’s flexibility and ease of use – Slave Panel
The CPS 6041 is a advanced monitor system for up to 4 rooms. It’s used in hospitals and processes where you need to have easy access to visible info on various important parameters for your operation and process. It can handle various sensors like Gases, Temp, Humidity, Air flow, Air Changes, Particles and Barometer etc.
Monitor positive or Negative pressure:
CPS 6041 operates in Dual room mode. E.g. you can easily switch from a positive room (protect the products or a patient) to a room in negative pressure (protect the surroundings from smell/dust/particles/bacteria/a sick patient).
The CPS system is Dynamic
CPS system is flexible and ease of use for the staff. The 6041 can monitor and show alarms (up to 4 units) for 4 different rooms at the same time. So if you have ante-rooms, or side rooms they can be monitored as well. And when being in the surrounding rooms you have this slave panel in these rooms as well. The Slave panels shows selected parameters so you always see the status and alarms in all important working areas. You can add up to 10 slave panels to one master panel. The slaves can be individually configured, which makes the system even more dynamic.
Safety
The concept is simple (therefore safe), the CPS system will normally display green when everything is OK and Red when there is an alarm condition. That combined with the high accuracy sensors that PSIDAC produce will assure a safe working environment, low cost in contamination problems, and the CPS system will give you a positive profiling and sales argument. Start informing clients/customers that you monitor your processes 24/7 for everybody’s safety.
Low installation cost
The system use intelligent sensors, and digital Modbus communication, so it’s low installation cost, and easy start-up compared to traditional analog systems. Since the system is based on advanced programming it is easy to add rooms or slave panels after installation.
Communications
The CPS 6041 system communicates to the BMS (Building Management System) or a SCADA-system so the measured parameters can be logged for history and trends. Alarms can be sent out by the BMS (or a dialer unit) to emails and SMS-cellphones for fast response by staff or service to minimize stop and costs. Relay (option) out for sum alarm.
Nurse Station
Add our Nurse Station NS10 that collects and shows status of max 10 CPS / rooms. Or NS20 that shows max 20 CPS systems / rooms in the reception or staff lunchroom etc.
